|
Brand Name: |
SUNNO |
|
Model No.: |
SN-30 |
|
Customized support: |
OEM |
This machine is a high precision wire rolling machine, especially suitable for the processing of long length screws, high precision fasteners, ohmic screws, ball screws and machinery, hardware tools, steam engine parts or iron pipe threads.
2, the advance and retreat movement is stable: the advance and retreat slide of the square track design is cast with the fuselage as a whole, and will not jump during the rolling pressure operation after grinding.
Loose, worn.
3, strong strength: hydraulic drive, a wide range of processing capacity.
4, fixed, rolling through dual-purpose: equipped with time limit control meter, can adjust the processing time.
5, full transmission: the worm after heat treatment is ground by thread, with phosphor bronze worm gear more closely combined, smooth transmission.
6. Both ends of the thimble support frame can be added according to the type of work, and the thread can be rolled to integrate the concentricity.
7, especially suitable for long ruler screw, ohm screw, ball screw and machinery, hardware tools, steam engine parts or iron pipe thread processing.
Specifications:
|
Energy efficiency \ Type |
SN-30 |
|
Outer diameter of rolled screws |
Ø6 ~ Ø30 mm |
|
Pitch range |
1.0p to 3.0p |
|
Rolling length fixed, rolling through (unlimited length) dual useWheel rpm |
18 x 28 x 40 x 55 rpm |
|
Roller outer diameter |
148 mm |
|
Roller bore |
54 mm |
|
Roller thickness |
70 mm |
|
Maximum distance between roller shafts |
175 mm |
|
Minimum distance between roller shafts |
120 mm |
|
The distance between bed surface and roller shaft center is |
130 mm |
|
Rolling capacity |
4 ~ 20 |
|
Main engine motor |
5 HP |
|
Hydraulic motor |
5 HP |
|
Feed pressure |
18 TONS |
|
Weight (approx.) |
1500 kgs |
|
Gross weight (approx.) |
1700 kgs |
|
Mechanical body |
1720 x 1260 x 1220 mm |
|
Packing size |
1760 x 1300 x 1400 mm |
